28732 members and growing – the largest networking group in the maritime industry!

LoginJoin

Saturday, January 25, 2020

Teak

Posted to Maritime Musings (by Dennis Bryant) on May 20, 2014

Teak is the common name for the Tectona grandis, a member of the verbena family native to the hardwood forests of India, Burma (Myanmar), Thailand, Malaysia, and Indonesia. It is a large deciduous tree, growing to a height of 130 feet, with gray and grayish brown branches.

Gulf States Shipbuilders Consortium Tackles Big Issues

Posted to Global Maritime Analysis with Joseph Keefe (by Joseph Keefe) on April 3, 2014

I want to start out by thanking Audrey (Kennedy) for inviting me to speak to you this afternoon. It’s a privilege to do so, especially with an audience representing such an important part of the domestic waterfront, and at a time when much of…

Integrating India’s Transport Network

Posted to Integrating India’s Transport Network (by Joseph Fonseca) on March 24, 2014

The logistics sector in India has today become an area of priority. One prime reason for it stems from the fact that years of high growth in the Indian economy have resulted in a significant rise in the volume of freight traffic movement. This…

Chowgule’s ship-lift fast becoming a reality

Posted to Chowgule’s ship-lift fast becoming a reality (by Joseph Fonseca) on January 8, 2014

Mid-way between Mumbai and Goa on the West coast of India, a new ship-lift facility being constructed by the Chowgule group, is fast becoming a reality. Situated adjacent to the group’s Angre Port, the repair yard will have the capacity to handle six ships simultaneously of up to 10…

Alfred Thayer Mahan

Posted to Maritime Musings (by Dennis Bryant) on September 16, 2011

Alfred Thayer Mahan (1840-1914) was born at West Point, where his father was an instructor. After graduating with distinction from the US Naval Academy in 1859, he served blockade duty on a number of warships during the Civil War. Mahan was promoted at…

Cruise of the Corwin

Posted to Maritime Musings (by Dennis Bryant) on June 10, 2011

The United States Revenue Cutter (USRC) Thomas Corwin was built in Portland, Oregon in 1876, becoming the first federal government vessel built in the state. She was finished and commissioned in San Francisco in 1877. San Francisco remained her homeport for her entire period of government service.

A Temporary Change in Latitude – and Attitude

Posted to Global Maritime Analysis with Joseph Keefe (by Joseph Keefe) on April 20, 2011

Bonaire, Netherland Antilles: Day four of spring break finds me on the verandah of my laid back Bonaire resort, looking out over the pristine maritime landscape. This week, we returned here for holiday, three years after first discovering this island jewel back in April of 2008.

Nikumaroro

Posted to Maritime Musings (by Dennis Bryant) on December 21, 2010

Nikumaroro (previously known as Gardner Island) is a small coral atoll in the central Pacific Ocean situated just south of the Equator and just west of the 180th meridian. It lies in the Phoenix Island Chain and is part of the Republic of Kiribati.

Strategic Local FPSO Builders Chosen

Posted to Brazilian Subsea and Maritime News (by Claudio Paschoa) on November 15, 2010

There was still a need for a tender process to select which local company would be responsible for the construction process of the first 8 FPSOs to be built from a total of 40 FPSOs originally calculated to be needed for the pre-salt development.

Temasek Holdings from Singapore Investing in Brazil´s O&G Market

Posted to Brazilian Subsea and Maritime News (by Claudio Paschoa) on October 26, 2010

Negotiations to conclude the deal have been going on for five months and the final agreement has been drawn whereas Temasek bought 14.3 % of OOG for $400 million. OOG´s main interest in the partnership was to attract capital in order to increase…

First Container Ship with Auxiliary LNG Power

Posted to Marine Propulsion Report (by Keith Henderson) on September 24, 2010

Announced during the recent SMM exhibition in Hamburg, the third generation German family container fleet owner Reederei Stefan Patjens is to retrofit a 5,000 TEU container vessel, the MV Maersk Drury for LNG operation. The 5,000 TEU container ship was built in 2006 by Hyundai Heavy Ind.…

Plug-in Shore Power

Posted to Marine Propulsion Report (by Keith Henderson) on September 18, 2010

A major factor slowing down the more widespread use of plug-in shore power to permit cold ironing is the lack of a safe, troublesome and easy to use standard for the shore to ship connector. Further complicating the problem is the abundance…

Move to give STCW a slant on learning

Posted to Move to give STCW a slant on learning (by Joseph Fonseca) on September 6, 2010

With near misses and accidents on the rise while at sea, the focus has with intensity come to rest on training and STCW conventions. A lot of soul searching and introspection is taking place with a section of trainers coming to the conclusion…

U.S. Coast Guard: Cherry-Picking is Not an Option

Posted to Global Maritime Analysis with Joseph Keefe (by Joseph Keefe) on September 1, 2010

Responding directly to our August 10th article entitled, “STCW Compliance: will we or won’t we,” the U.S. Coast Guard’s Director of National and International Standards has affirmed the U.S. position on STCW compliance, especially as it relates…

Automatic Engine Tuning

Posted to Marine Propulsion Report (by Keith Henderson) on August 27, 2010

Automatic optimization of marine diesel engine performance using loop control of the cylinder pressure process has been under development for a number of years at both MAN Diesel & Turbo and Wärtsilä. Targeting the slow speed two stroke engines…

SCI takes delivery of its first LR-I size Product Tanker

Posted to SCI takes delivery of its first LR-I size Product Tanker (by Joseph Fonseca) on July 26, 2010

State owned Shipping Corporation of India Ltd. (SCI) took delivery of a Long Range-I (LR-I) Product Tanker, M.T. Swarna Sindhu, on 23rd July, 2010 raising the number of tankers in its fleet to 41 and the company’s total fleet strength to 74 vessels. M.T.

Unique Corus Tubes for Tupi Project

Posted to Brazilian Subsea and Maritime News (by Claudio Paschoa) on July 9, 2010

Corus Tubes has successfully manufactured 118km of 457mm x 31.75mm Grade X65 sour linepipe for the Petrobras Tupi project. This linepipe is designed to operate in Brazil’s Santos Basin at a depth of 2200m, and is thickest 18” UOE pipe manufactured to date.

Subsea Power Grid to Enable Large-Scale Subsea Processing

Posted to Brazilian Subsea and Maritime News (by Claudio Paschoa) on June 16, 2010

Large-scale seabed processing facilities will require a subsea power grid system that is able to operate for long step-outs with total reliability withstanding extreme pressure and temperatures. As technology leader on land-based power grids…